 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Bulletin PD-20652 rev. B 02/04 15ETX06 15ETX06S 15ETX06-1 15ETX06FP Hyperfast Rectifier Features * * * * * Benchmark Ultra-low Forward Voltage Drop Hyperfast Recovery Time Low Leakage Current 175C Operating Junction Temperature Fully Isolated package (VINS = 2500 VRMS) trr = 18 ns IF(AV) = 15Amp VR = 600V Description/ Applications State of the art Hyperfast recovery rectifiers designed with optimized performance of forward voltage drop, Hyperfast recover time, and soft recovery. The planar structure and the platinum doped life time control guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in PFC Boost stage in the AC-DC section of SMPS, inverters or as freewheeling diodes. The IR extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. Absolute Maximum Ratings Parameters VRRM IF(AV) IFSM IFM Peak Repetitive Reverse Voltage 600 Average Rectified Forward Current @ TC = 133C @ TC = 62C (FULLPACK) Non Repetitive Peak Surge Current @ TJ = 25C Peak Repetitive Forward Current 170 30 - 65 to 175 C Max V 15 Units A TJ, TSTG Operating Junction and Storage Temperatures Case Styles 15ETX06 15ETX06S 15ETX06-1 15ETX06FP Base Cathode 2 Base Cathode 2 2 1 1 3 3 1 3 1 3 Cathode Anode Cathode Anode N/C Anode N/C Anode TO-220AC www.irf.com D2PAK TO-262 TO-220 FULLPACK 1 15ETX06, 15ETX06S, 15ETX06-1, 15ETX06FP Bulletin PD-20652 rev. B 02/04 Electrical Characteristics @ TJ = 25C (unless otherwise specified) Parameters VBR, Vr VF Breakdown Voltage, Blocking Voltage Forward Voltage Min Typ Max Units Test Conditions 600 2.3 1.5 0.1 40 20 8.0 3.2 1.8 50 300 V V V A A pF nH IR = 100A IF = 15A, TJ = 25C IF = 15A, TJ = 150C VR = VR Rated TJ = 150C, VR = VR Rated VR = 600V Measured lead to lead 5mm from package body IR Reverse Leakage Current - CT LS Junction Capacitance Series Inductance - Dynamic Recovery Characteristics @ TC = 25C (unless otherwise specified) Parameters trr Reverse Recovery Time Min Typ Max Units Test Conditions 18 20 22 52 2.4 5.1 25 150 37 16 350 22 32 ns A nC nC A ns IF = 1A, diF/dt = 100A/s, VR = 30V IF = 15A, diF/dt = 100A/s, VR = 30V TJ = 25C TJ = 125C TJ = 25C TJ = 125C TJ = 25C TJ = 125C TJ = 125C TJ = 125C TJ = 125C IF = 15A diF /dt = 800A/s VR = 390V IF = 15A diF /dt = 200A/s VR = 390V IRRM Qrr trr IRRM Qrr Peak Recovery Current Reverse Recovery Charge Reverse Recovery Time Peak Recovery Current Reverse Recovery Charge - Thermal - Mechanical Characteristics Parameters TJ TStg RthJC RthJA RthCS Max. Junction Temperature Range Max. Storage Temperature Range Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient Thermal Resistance, Case to Heatsink Weight Mounting Torque Per Leg Per Leg Fullpack (Per Leg) Min - 65 6.0 5.0 Typ 1.0 3.0 0.5 2.0 0.07 - Max 175 175 1.3 3.5 70 12 10 Units C C/W g (oz) Kg-cm lbf.in Typical Socket Mount Mounting Surface, Flat, Smooth and Greased 2 www.irf.com 15ETX06, 15ETX06S, 15ETX06-1, 15ETX06FP Bulletin PD-20652 rev. B 02/04 100 Reverse Current - I R (A) 1000 T J = 175C 100 10 1 0.1 0.01 150C 125C 100C 25C Instantaneous Forward Current - I F (A) 0.001 0.0001 0 100 200 300 400 500 600 10 T = 175C J Junction Capacitance - C T (pF) Reverse Voltage - VR (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage 1000 T = 25C J T = 150C J T = 25C J 100 10 1 0 0.5 1 1.5 2 2.5 3 3.5 4 Forward Voltage Drop - VFM (V) Fig. 1 - Typical Forward Voltage Drop Characteristics 1 0 100 200 300 400 500 600 Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage 10 (C/W) thJC Thermal Impedance Z 1 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 Single Pulse (Thermal Resistance) PDM t1 t2 0.1 Notes: 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc 0.01 0.00001 0.0001 0.001 0.01 t1, Rectangular Pulse Duration (Seconds) 0.1 1 Fig. 4 - Max. Thermal Impedance Z thJC Characteristics www.irf.com 3 15ETX06, 15ETX06S, 15ETX06-1, 15ETX06FP Bulletin PD-20652 rev. B 02/04 10 (C/W) 1 Thermal Impedance Z D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 Single Pulse (Thermal Resistance) Notes: thJC PDM t1 t2 0.1 1. Duty factor D = t1/ t2 2. Peak Tj = Pdm x ZthJC + Tc 0.01 0.00001 0.0001 0.001 0.01 0.1 1 10 100 t1, Rectangular Pulse Duration (Seconds) Fig. 5 - Max. Thermal Impedance Z thJC Characteristics (FULLPACK) 180 Allowable Case Temperature (C) 200 Allowable Case Temperature (C) 170 160 150 140 130 Square wave (D = 0.50) Rated Vr applied 150 DC 100 DC 50 Square wave (D = 0.50) Rated Vr applied see note (3) 120 see note (3) 110 0 5 10 15 20 25 Average Forward Current - IF(AV) (A) Fig. 6 - Max. Allowable Case Temperature Vs. Average Forward Current 0 0 5 10 15 20 25 Average Forward Current - IF(AV) (A) Fig. 7 - Max. Allowable Case Temperature Vs. Average Forward Current (FULLPACK) 40 Average Power Loss ( Watts ) 35 30 25 20 15 10 5 0 0 5 DC RMS Limit D = 0.01 D = 0.02 D = 0.05 D = 0.1 D = 0.2 D = 0.5 (3) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 8); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = rated VR Average Forward Current - IF(AV) (A) 10 15 20 25 Fig. 8 - Forward Power Loss Characteristics 4 www.irf.com 15ETX06, 15ETX06S, 15ETX06-1, 15ETX06FP Bulletin PD-20652 rev. B 02/04 70 450 400 350 V R = 390V T J = 125C T J = 25C 50 trr ( ns ) IF = 15 A IF = 30 A 300 Qrr ( nC ) IF = 30 A 250 200 150 IF = 15 A 30 IF = 30 A 100 50 IF = 15 A IF = 30 A V R = 390V T J = 125C T J = 25C IF = 15 A 10 100 1000 0 100 1000 di F /dt (A/s ) Fig. 9 - Typical Reverse Recovery vs. di F /dt di F /dt (A/s ) Fig. 10 - Typical Stored Charge vs. di F /dt Reverse Recovery Circuit VR = 200V 0.01 L = 70H D.U.T. dif/dt ADJUST diF /dt D G IRFP250 S Fig. 11- Reverse Recovery Parameter Test Circuit www.irf.com 5 15ETX06, 15ETX06S, 15ETX06-1, 15ETX06FP Bulletin PD-20652 rev. B 02/04 3 IF 0 t rr ta tb 4 Q rr 2 I RRM 0.5 I RRM di(rec)M/dt 0.75 I RRM 5 1 diF /dt f 1. diF/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current 4. Qrr - Area under curve defined by t rr and IRRM t rr x I RRM Q rr = 2 5. di (rec) M / dt - Peak rate of change of current during t b portion of t rr Fig. 12 - Reverse Recovery Waveform and Definitions Outline Table 10.54 (0.41) MAX. 3.78 (0.15) 3.54 (0.14) 15.24 (0.60) 14.84 (0.58) 1 14.09 (0.55) 13.47 (0.53) 3 3.96 (0.16) 3.55 (0.14) 2.04 (0.080) MAX. 1.40 (0.05) 1.15 (0.04) 0.94 (0.04) 0.69 (0.03) 2.89 (0.11) 2.64 (0.10) 0.10 (0.004) 2.92 (0.11) 2.54 (0.10) TERM 2 DIA. 6.48 (0.25) 6.23 (0.24) 2 1 3 1.32 (0.05) 1.22 (0.05) Base Cathode 2 Cathode Anode 1 4.57 (0.18) 4.32 (0.17) 3 0.61 (0.02) MAX. 5.08 (0.20) REF. Conforms to JEDEC Outline TO-220AC Dimensions in millimeters and (inches) 6 www.irf.com 15ETX06, 15ETX06S, 15ETX06-1, 15ETX06FP Bulletin PD-20652 rev. B 02/04 Outline Table 10.16 (0.40) REF. 4.69 (0.18) 4.20 (0.16) 1.32 (0.05) 6.47 (0.25) 15.49 (0.61) 1.22 (0.05) 93 6.18 (0.24) 14.73 (0.58) 2.61 (0.10) 2.32 (0.09) 8.89 (0.35) 5.28 (0.21) 4.78 (0.19) Base Cathode 2 0.55 (0.02) 0.46 (0.02) 3X 1.40 (0.055) REF. 0.93 (0.37) 0.69 (0.27) 1.14 (0.045) 2X MINIMUM RECOMMENDED FOOTPRINT 11.43 (0.45) 1 3 N/C 1 3 4.57 (0.18) Anode 4.32 (0.17) 2 0.61 (0.02) MAX. 5.08 (0.20) REF. 8.89 (0.35) 17.78 (0.70) 3.81 (0.15) 2.08 (0.08) 2X 2.54 (0.10) 2X Conforms to JEDEC Outline D2PAK Dimensions in millimeters and (inches) 2 1 3 N/C Anode NC Modified JEDEC outline TO-262 Dimensions in millimeters and (inches) www.irf.com 7 15ETX06, 15ETX06S, 15ETX06-1, 15ETX06FP Bulletin PD-20652 rev. B 02/04 Outline Table 10.6 10.4 HOLE o 3.4 3.1 2.8 2.6 3.7 3.2 1 3 Cathode Anode 7.1 6.7 16.4 15.4 16.0 15.8 10 3.1 3.3 13.7 2.54 TYP. 0.9 0.7 2.54 TYP. 0.48 0.44 2.85 2.65 1.15 1.4 1.3 1.05 TYP R0.7 (2 PLACES) R0.5 4.8 4.6 Conforms to JEDEC Outline TO-220 FULLPACK Dimensions in millimeters and (inches) 5 0.5 5 0.5 Ordering Information Table Device Code 15 1 E 2 T 3 X 4 06 5 -1 6 1 2 3 4 5 6 - Current Rating (15 = 15A) E T X = Single Diode = TO-220, D2Pak = HyperFast Recovery Voltage Rating (06 = 600V) "-1" = TO-262 Option S = D2Pak None = TO-220AC FP = TO-220 FULLPACK 13.5 8 www.irf.com 15ETX06, 15ETX06S, 15ETX06-1, 15ETX06FP Bulletin PD-20652 rev. B 02/04 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 02/04 www.irf.com 9 |
Price & Availability of 15ETX06S
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |